|
Sunday
|
Monday
|
Tuesday
|
Wednesday
|
Thursday
|
Friday
|
Saturday
|
|---|---|---|---|---|---|---|
1 event,
Start a career in crane operations through Crane Tech’s Professional Operator Development (POD) program. This multi-week course combines classroom instruction and guided hands-on training on real cranes to build strong foundational skills in setup, lifting, signaling, and safety. The program meets OSHA and ASME requirements and prepares participants for multiple credentials. Students who successfully complete […]
Get Tickets
$7,395.00
|
4 events,
Learn the standardized hand and voice signals used to direct cranes safely and effectively. This course combines classroom instruction with practical demonstrations to build clear, confident communication between operators and rigging crews. Students practice signaling techniques, radio protocol, and situational awareness under real-world conditions. Training aligns with OSHA 1926.1428 and ASME B30.5 standards. Successful participants […]
Get Tickets
$297.50 – $595.00
This Train-the-Trainer course qualifies internal personnel to deliver and document Qualified Signalperson training using Crane Tech’s standardized curriculum and instructional framework. The program covers standardized hand and voice signals, radio communication protocols, and situational awareness required to safely direct crane operations, with additional emphasis on conducting evaluations, applying consistent qualification criteria, and maintaining defensible training […]
Get Tickets
$697.50 – $1,395.00
Prepare for the CCO Signalperson written and practical exams with hands-on, instructor-led training. Students practice hand and voice communication techniques, crane movement coordination, and load direction under realistic field conditions. The course aligns with OSHA 1926.1428 and ASME B30.5 standards. Exams are conducted during the course. Participants who pass both earn CCO Signalperson certification, validating […]
Get Tickets
$1,695.00
|
5 events,
Gain the skills to safely perform basic rigging under supervision. This hands-on course covers standard hitches, sling and hardware inspection, load weight estimation, and safe control of routine lifts. Students learn to recognize hazards, select the right rigging gear, and apply safe lifting practices in compliance with OSHA 1926.251 and ASME B30.9/B30.26. Participants earn qualification […]
Get Tickets
$297.50 – $595.00
Develop a solid foundation in rigging principles while preparing for the CCO Rigger Level I written and practical exams. Students learn to select rigging gear, calculate load weights, inspect hardware, and apply safe hitches through hands-on exercises. The course meets OSHA and ASME B30.9/B30.26 standards. Participants who pass both exams earn CCO Rigger Level I […]
Get Tickets
$1,695.00
This Train-the-Trainer course qualifies internal personnel to deliver and document Qualified Rigger Level 1 training using Crane Tech’s standardized curriculum and instructional framework. The program covers foundational rigging principles for routine lifting operations, including standard hitches, sling and hardware inspection, load weight estimation, and hazard recognition, with additional emphasis on conducting evaluations, applying consistent qualification […]
Get Tickets
$697.50 – $1,395.00
|
7 events,
Advance your rigging expertise to handle more complex lifts and variable conditions. This course builds on Level 1 by introducing load center-of-gravity estimation, sling tension calculations, non-standard hitches, and rigging in restricted or uneven areas. Instructor-led field exercises reinforce safe lift planning and coordination with crane operators. Training follows OSHA 1926.251 and ASME B30 standards […]
Get Tickets
$847.50 – $1,995.00
Advance your rigging knowledge to handle complex lifts and earn your CCO Rigger Level II certification. This course builds on Level I concepts and introduces advanced rigging calculations, multi-crane coordination, and non-routine lift planning. Instructor-led demonstrations and field exercises prepare students for the written and practical exams, administered during the course. Graduates earn nationally accredited […]
Get Tickets
$1,695.00
Advance your rigging knowledge to handle complex lifts and earn your CCO Rigger Level II certification. This course builds on Level I concepts and introduces advanced rigging calculations, multi-crane coordination, and non-routine lift planning. Instructor-led demonstrations and field exercises prepare students for the written and practical exams, administered during the course. Graduates earn nationally accredited […]
Get Tickets
$1,695.00
Advance your rigging expertise to handle more complex lifts and variable conditions. This course builds on Level 1 by introducing load center-of-gravity estimation, sling tension calculations, non-standard hitches, and rigging in restricted or uneven areas. Instructor-led field exercises reinforce safe lift planning and coordination with crane operators. Training follows OSHA 1926.251 and ASME B30 standards […]
Get Tickets
$497.50 – $1,195.00
|
0 events,
|
||
|
0 events,
|
3 events,
Start a career in crane operations through Crane Tech’s Professional Operator Development (POD) program. This multi-week course combines classroom instruction and guided hands-on training on real cranes to build strong foundational skills in setup, lifting, signaling, and safety. The program meets OSHA and ASME requirements and prepares participants for multiple credentials. Students who successfully complete […]
Get Tickets
$4,995.00
This course provides new and experienced operators with the knowledge and practical skills to safely operate mobile cranes in general industry environments. Instructor-led classroom and field training emphasize setup, pre-use inspections, signaling, and managing swing radius for multiple crane configurations. The course follows OSHA 29 CFR 1910 and ASME B30.5 standards for mobile crane operation […]
Get Tickets
$597.50 – $1,395.00
This Train-the-Trainer course qualifies internal personnel to deliver and document Mobile Crane Operator training using Crane Tech’s standardized curriculum and instructional framework. The program covers mobile crane operation in general industry environments, with an added emphasis on conducting evaluations, applying consistent qualification criteria, and maintaining defensible training records aligned with OSHA 29 CFR 1910 and […]
Get Tickets
$847.50 – $1,995.00
|
3 events,
Gain the skills to safely perform basic rigging under supervision. This hands-on course covers standard hitches, sling and hardware inspection, load weight estimation, and safe control of routine lifts. Students learn to recognize hazards, select the right rigging gear, and apply safe lifting practices in compliance with OSHA 1926.251 and ASME B30.9/B30.26. Participants earn qualification […]
Get Tickets
$297.50 – $595.00
This Train-the-Trainer course qualifies internal personnel to deliver and document Qualified Rigger Level 1 training using Crane Tech’s standardized curriculum and instructional framework. The program covers foundational rigging principles for routine lifting operations, including standard hitches, sling and hardware inspection, load weight estimation, and hazard recognition, with additional emphasis on conducting evaluations, applying consistent qualification […]
Get Tickets
$697.50 – $1,395.00
|
||||
2 events,
Train to earn your CCO Mobile Crane Operator certification with Crane Tech’s instructor-led, hands-on course. Students learn to read and apply load charts, conduct safe setup and pre-use inspections, and execute precise lifting operations using telescopic and lattice boom cranes. Written and practical CCO exams are administered during the course. Graduates earn nationally accredited CCO […]
Get Tickets
$2,395.00
|
0 events,
|
|||||
|
0 events,
|
0 events,
|
1 event,
Gain the skills to conduct frequent and periodic inspections of telescopic and lattice boom cranes in compliance with OSHA 1910.180, OSHA 1926 Subpart CC, and ASME B30.5. This four-day program combines classroom instruction and field practice on real cranes to build confidence in evaluating components, wire rope, and safety systems. Students learn to recognize hazards, […]
Get Tickets
$697.50 – $1,695.00
|
1 event, |
1 event, |
0 events,
|
0 events,
|
|
0 events,
|
2 events,
Learn to operate overhead and gantry cranes with precision and confidence in manufacturing, maintenance, and industrial facilities. This instructor-led course covers pre-use inspections, load alignment, pendant and cab control operation, and coordination with rigging teams for safe, efficient lifts. The program meets OSHA 29 CFR 1910.179 and ASME B30.2 standards. Participants complete written and practical […]
Get Tickets
$347.50 – $995.00
This Train-the-Trainer course qualifies internal personnel to deliver and document Overhead and Gantry Crane Operator training using Crane Tech’s standardized curriculum and instructional framework. The program covers overhead and gantry crane operation in manufacturing, maintenance, and industrial environments, with additional emphasis on conducting evaluations, applying consistent qualification criteria, and maintaining defensible training records aligned with […]
Get Tickets
$697.50 – $1,695.00
|
0 events,
|
1 event,
Train to perform frequent and annual inspections of overhead cranes and hoists used in manufacturing, maintenance, and industrial settings. This hands-on course follows OSHA 1910.179, ASME B30.16, and ASME B30.17 standards, teaching participants to evaluate mechanical, structural, and electrical components for safety and compliance. Students practice applying inspection criteria and documenting results accurately. Graduates earn […]
Get Tickets
$497.50 – $1,295.00
|
1 event, |
0 events,
|
0 events,
|
